µFold Manual
The following illustration shows actual oscilloscope photos of how the SYMMETRY
setting affects the wavefolding:
4. SYMMETRY attenuator - You can modulate the SYMMETRY amount with a control
signal patched into the SYM input. The SYMMETRY attenuator adjusts the extent to
which that control signal is added to the value set with the SYMMETRY knob.
5. STAGES - Sets the maximum number of times that a waveform will fold over as you
increase the FOLDS amount.
Front Panel: Inputs & Outputs
A. IN - Input for the waveform you wish to fold. The input is DC-coupled, and will accept
either audio or CV waveforms for folding.
B. OUT - The folded version of the waveform is sent to this output.
C. FOLDS - CV input for controlling the FOLDS level. Use the FOLDS attenuator to adjust
the extent to which this signal is added to the value set with the FOLDS knob.
D. SYM - CV input for controlling the SYMMETRY amount. Use the SYMMETRY
attenuator to adjust the extent to which this signal is added to the value set with the
SYMMETRY knob.
Page 8
