µFold Manual
2. FOLDS attenuator - You can modulate the FOLDS amount with a control signal patched
into the FOLDS input. The FOLDS attenuator adjusts the extent to which that control
signal is added to the value set with the FOLDS knob.
3. SYMMETRY - Symmetry adds a positive or negative DC offset to the waveform, shifting
it’s zero-crossing up or down, and thus affecting the symmetry of the folded waveform.
When the SYMMETRY knob is set at noon (straight up), the waveform’s center-point
corresponds to 0V, and positive and negative voltages will fold equally.
When the SYMMETRY knob is rotated clockwise, the waveform is biased toward
positive voltages, meaning that more folding occurs on the positive peaks than on the
negative peaks.
When the SYMMETRY knob is rotated counterclockwise, the waveform is biased toward
negative voltages, meaning that more folding occurs on the negative peaks than on the
positive.
Page 7
