a. Turn scale off
b. Press and hold
TARE
, then press
ON/OFF
c. Scale displays
F.1
d. Press
TARE
three times
e. Scale displays
F.4
f. Press
MODE
to shift between
0._OFF
and
4._OFF
.
-To enable
Auto Power Off Function
, press
TARE
when
4._OFF
appears.
-To disable
Auto Power Off Function
, press
TARE
when
0._OFF
appears.
g. Press
ZERO
to confirm and return to normal
operation.
4.4 TO TARE OFF THE WEIGHT OF A CONTAINER
4.4.1 Place
a container onto the platform, and
then press TARE to tare off the weight of this
container. After TARE is pressed, the tare sign
appears.
4.4.2 To Clear Container Weight from Memory
To clear the weight of the container, remove
the container and all loads from the platform
and press TARE. Then the tare sign disappears.
4.5 Zero the Weight Displayed When Unloaded
If zero weight value is not displayed when the
scale is unloaded, press ZERO to reset weight
to zero.
4.6 PLACING A LOAD
Always place a load to the platform gently.
Sudden shock/excessive force may cause damage
to the weight sensor inside.
It is a good practice to remove all loads from
platform immediately after weighed. This would
prolong the lifetime of the weight sensor.
4.7 HOLDING A WEIGHT DISPLAYED
4.7.1 When Auto Hold Function is not employed
Press HOLD to retain the weight displayed. 5
flashing arrows beneath the weight would appear
indicating the weight displayed is being held.
Press HOLD again to release.
4.7.2 When Auto Hold Function is employed
After the load is stable, the scale would
automatically retain the weight displayed. 5
flashing arrows beneath the weight would appear
indicating the weight displayed is being held.
Weight retained would