d.
Print.
Press the “MODE” key until “Prt” is displayed. Press the
“TARE” key to confirm. Press the “MODE” key to change
between “hAnd”, “Auto” and “Contin”. Press the “TARE” key to
accept.
i.
“hAnd” –
Print on demand
ii.
“AUto” –
Print when the balance is stable
iii.
“Contin”
–
Print continuously
RS 232 port parameter
ASCII code transmission data format: Every 10BIT as a
Data frame.
1 start bit, 8 data bits, 1 stop bit, no parity
Baud rate: 9600 bps
e.
Filtering (Speed of Weighing).
Press the “TARE” key for 3
seconds. The display will show
either “SPEED1” or “SPEED2,
and then return to weighing mode. The speed will remain at
the last speed displayed. To change the speed, repeat the
above process. The slower s
peed, “SPEED1” is more accurate.
“SPEED2” is faster.
Protect the unit against moisture.
Please disconnect the unit from the main power supply before cleaning. Do not
use any liquids or aerosol sprays to clean this unit. Use only a clean dampened
cloth.
Intelligent Weighing Technology, Inc.
www.intelligentwt.com