Intelligent Home NTI700, Manual

Page: 4 / 17

Video Monitor features
1. Screen
2. TALK/OFF button
When it rings it is activate a communication line
and also to turn the screen off.
3. MONITOR/SWITCH button
Press to turn on the monitor manually.
Fig.4 When it is on, you can switch the screen from
one door station to the other. To turn off, press
TALK button twice.
4. DOOR OPEN button
When the monitor screen is off, press-and-hold
this button for 3 seconds to change the ring tone
then
press the DOOR OPEN button to set the ring
tone.
5. Interphone button (Refer to page 8)
6. Allows you to call other monitors for internal
Fig.5 communication.
7. Microphone.
8. Ring Tone Volume
Allows you to adjust the ring tone.
9. Brightness adjustment
Allows you to adjust the brightness.
10. Master/Slave Settings
The monitor that is connected to any camera
MUST set its’ two DIP switches to MASTER
position.
Rest of the monitor’s two DIP switches must be
set to SLAVE position.
11. Speaker
12. Wall mount bracket
Fig.6 13. Connection Terminal Description
1) 4P – Camera 1
1. Audio 2.GND 3.B+ 4.VIDEO
2) 4P – Camera 2
1. Audio 2.GND 3.B+ 4.VIDEO
3) 4P – slave Monitor
1.SV(VIDEO) 2.SA(AUDIO) 3.DATA
4.GND
4) 4P – slave Audio set
1.B+ 2.AUDIO 3.DATA 4.GND
5) 2P – Power
1.B- 2.B+
Fig.7
Page 3