- 4 -
5. SPECIFICATIIONS
6. PRECAUTIONS
Power supply:
DC 18V
▪
Power consumption:
Standby 0.5W; Working status 15W
▪
Camera Lens:
3.6mm, 72 degree visual angle
▪
Camera resolutions:
>300 TV lines
▪
Video signal:
1Vp-p, 75Ω, CCIR standard
▪
Monitor time:
30 seconds
▪
alking time:
90 seconds
▪
Connection mode:
4 wiring, polar
▪
Dimensions:
336(W)×125(H)×50(D)mm
▪
All parts should be protected from violence vibration or dropping.
▪
Please do the cleanness with soft cotton cloth, please do not use the organic
▪
or chemical clean impregnate.
Image distortion may occur if the Door station is mounted too close to
▪
magnetic field e. g. Microwaves, etc.
Please keep the Door station away from wet, high temperature, dust, and
▪
caustic and oxidation gas in order to avoid any unpredictable damage
4. NAMEPLATE INSTRUCTIONS
Dav
id
Calo
Down press the left side of the nameplate and push to left, then the right side
▪
of the nameplate will jump up
Take the nameplate out and put the paper with the names in between the
▪
two pices of the nameplate, then put them back into the door station
Summary of Contents for MR7D
Page 7: ......
