-10-
1)Power-on
and
within 10
seconds
2)Press and hold "KEY2" for 3
seconds,
to
enter the
Programming mode
LED 1 Buzzer
bee
p
,beep
(red,flash
ing
)
Press and hold "KEY2" for 3
seconds
LED 1 Buzzer
beep,beep
(off)
Door Station R
ingtone Settings
There are three options of ringtone: [A]-One ringtone, [B]-Continuous ringtone, [C]-No ringtone.
The default is A- One ringtone
Followed by pressing the "KEY2"
button,each time you press KEY2
to replace the ringtone mode;
Note:The ringtone mode will cycle
between
[A]
[B]
[C].
LED 1 Buzzer
beep one
[A]:
beep twice
[B]:
beep 3 times
[C]:
(green,flash one)
(green,flash twice)
(green,flash 3 times)
Note:
any operation
must be done
within 10s
of door station powered-up
Note:
If there is no activity within 10seconds, system will exit Programming mode