IA-2660-Ui
34
www.intelligent-appliance.com
Specifications are subject to change without notice
Isolated TCP/IP
96 Digital TTL/LVTTL
Pluggable Terminal Blocks
!aa7dd
–
Set module’s address
Description
Each device must have a unique network address.
This command defines
a module’s address.
Syntax
!aa7dd <CR>
!
Delimiter character
aa
Hexadecimal address of the device
7
Change device baud rate command
dd
New Hexadecimal address
<CR> Carriage Return - End of command
Response
|dd<CR> if the command was valid
Example
Command: !00701<CR>
Response: |01<CR>
Change the address of the device at address 0(Hex) to 1(Hex)
1.
Factory default is 00Hex
2.
In products chained system, each product must be set to a unique
address.
3.
On chainable modules the updated address is displayed on the
boards 7 segment led display.
Note
!
