IA-2660-Ui
11
www.intelligent-appliance.com
Specifications are subject to change without notice
Isolated TCP/IP
96 Digital TTL/LVTTL
Pluggable Terminal Blocks
Software Installation
USB Port setup
Connect USB A/B Cable between the device to the host computer.
The computer informs on locating a new USB device, and asks for S/W drivers.
Kindly choose the USB-Drivers directory on the IA-3000 CD or from our website:
www.intelligent-appliance.com
, and complete the task by pressing ‘Next’ and ‘Finish’ whil
e
asked for.
Job done will be accomplished by a steady lilting of the USB led on the device unit, and by a
creation of new Serial COM that can be easily found on the Device Manager screen.
At this stage you can easily control the device
I/O’s
by either any serial control software, or
by the IA3000Util Utility, provided in the IA-3000 CD (see next page).
Locating the new COM port
Start the ‘Device Manager’ utility. (Usually by selecting ‘My Computer’, Right Clicking the
mouse button, choosing manage, Left Clicking and then double Left clicking on the Device
Manager will list hardware items).
Select the ‘+’ character to the left of the ‘Ports (COM&LPT)’, and you’ll get a line that will
define for example: ‘USB Serial Port (COM4)’.
This line informs us that we should refer to COM4, in this case, in order to control the device
while connected to this computer through its USB port.
IA3000Util Command Line
