Viewing Of Video After Deployment:
Overview: Once the System X2 has been deployed at the surveillance site, if anyone
enters that area and “triggers” a sensor, the System X2 will automatically power up,
start recording video, and will send a text to all pre-programmed Users listed in the
Flashback User Interface, notifying them of alarm activity.
IMPORTANT: The System X2 will be powered “on” for only 15 minutes (unless the
suspect remains in that area and “re-triggers” the sensor, which will cause the System
X2 to remain on for additional time until the suspect leaves that area).
The only time window for you to login into the Flashback User Interface is during this
15 minute period after you have received the initial SMS test message.
1. Once you receive the SMS text message, open your smartphone and click on the
FB4 Webpage that was previously loaded onto your phone. (Example IP
Address: 123.123.123.123).
2. Default login is USER: admin / PASSWORD: icam1007).
3. Once on the FB4 Flashback Homepage, click on “SD Card” tab. The recorded
videos will be displayed by date and time. SD1 is for Camera 1 and SD2 is for
Camera 2. With each sensor activation, there will be, both a “video” and a “still
shot jpeg”. Select the desired time and date for the video recording that you wish
to view, and click “Download”.
4. The desired video will be downloaded and you will automatically be redirected to
your phone’s VLC Media Player to view the selected video.
