April 1, 2022
System X2 iPhone Quick Setup
Programming iPhones Prior To Field Deployment
1. Download and install VLC Media Player onto your smartphone.
(
www.videolan.org
)
2. Connect all video cables, cameras, and antenna to the System X2 DVR
enclosure. Connect the video monitor only when aiming the cameras.
(Prolonged connection of the video monitor will greatly reduce battery life).
3. Power up the System X2 by connecting the supplied AC power adapter, (use of
the Battery Pack during set up is not recommended as you will waste battery
power). Once power is connected, manually trigger the IR-904 sensor, to power
up the System X2.
4. Open a web browser on your smartphone and enter the IP address assigned to
your specific System X2. Example: 123.123.123.123 to open the FB-4 User
Interface. If possible, you should “label” this webpage as:
“FB4 Webpage”.
Then save it as your “Home Page”.
5. Login to the FB-4 User Interface. Default login is USER: admin /
PASSWORD: icam1007.
6. Once logged onto the Flashback User Interface .Click on Network tab, then
scroll down and click on SMS tab. Check to make sure your smartphone is
programmed into the SMS text list.
7. Next click on the “SD Card” tab. All recorded video and jpeg still shots will be
displayed with date and time stamp.
