Section 3: Printer Set Up And Network Configuration
3-3
3.2 NETWORK SETUP
3.2.1 Printer to Network Physical Connection.
Connect the printer RJ45 port to a network hub, switch or router using CAT 5 unshielded twisted
pair cable.
3.2.1.1 Assign Printer IP Address
Install the printer on the AS/400 or iSeries host network by setting the IP address, subnet mask
and gateway. Assign an IP address to the IntelliBar AS Net printer using one of the following
network configuration utilities: XAdmin32 (Recommended), HP Web Jetadmin or Telnet.
Note: Consult your system manager before assigning IP addresses to the
print server in order to avoid IP address duplications. Your network ad-
ministrator will need to issue a unique static IP address for the printer.
Make sure that the printer IP address is on the same TCP/IP network
and sub-net as the host computer.
You will need to know the IntelliBar AS Net print server IP address in
order to access the print server with XAdmin32. Refer to the print server
test page you printed in Section 3.1.4 above.
All IntelliBar AS Net print servers are shipped with the factory default IP
address of 192.0.0.192. XAdmin32 recognizes the factory default ad-
dress as an unconfigured print server.
In order to configure using a web browser, the IntelliBar print server IP
address must first be configured for your network using XAdmin32.
3.2.1.2 Configure the IntelliBar print server using XAdmin32 (Recommended Con-
figuration Utility).
XAdmin32 is a 32-bit Windows graphical interface utility for configuration and management of
the IntelliBar AS Net print server. XAdmin32 works on Windows 95/98, NT, 2000 or XP us-
ing the TCP/IP or IPX/SPX protocols.
3.2.1.2.1 Install XAdmin32 on a PC Workstation.
Find the copy of Xadmin32 on the CD ROM supplied with your printer or download a free copy
from
http://www.intellitech-intl.com/portasp/drivers.asp
and install it on a PC workstation that is
on the same network as the printer. Follow the XAdmin32 setup instructions on the screen to
complete the installation.