Intellian v80G, Installation And Operation User Manual

Page: 51 / 149

51
OPERATING THE ACU
N B D F : 1 2 4 7 0 0 0 B W : 1 0 0 0 S I G : 3 0 1
0 0 4 . 5 3 E 5 2 . 2 2 N H D G : 0 9 0 . 0 L : 1 0 0 0 0 F n
5. NBD, GPS and ship’s heading information are shown.
- NBD (Narrow Band Detection) IF tracking frequency: 1247000 kHz
- Detected Band Width: 1000 kHz
- SIG (Signal Level ): 301 (When NBD mode for tracking signal is chosen)
- W (West)/E (East) Longitude: 4.53º E
- N (North)/S (South) Latitude: 52.22º N
- HDG (Ship’s Heading): 90º
- LNB local oscillator (LO) frequency: 10000 MHz
[ P W R ] A N T : 2 6 . 4 V L N B : 1 3 V + 0 k H z
A C U : 2 7 . 1 V [ P O L ] T X : V R X : H
6. Press RIGHT arrow key to display the current operation voltage for antenna, ACU and
LNB. POL indicates the TX polarity (VERTICAL) and RX polarity (HORIZONTAL).
V 2 - 8 1 - C F W A N T . S E R I A L 1 . 0 0 / 1 . 0 0
V P - T 5 2 9 A C U S E R I A L 1 . 0 0
7. Press RIGHT arrow key to display the below information.
- Antenna part number, antenna serial number and PCU firmware version.
- ACU part number, ACU serial number, and ACU firmware version.
Press BACK Key to return to the first page of the antenna current status.
Tracking & Heading
information
Power status
Antenna & ACU
versions
8.Touch RIGHT arrow key to display the
USB FUNCTION*
This menu will be displayed automatically if a USB flash drive is plugged into the USB port
located in the front panel of the ACU.
USB FUNCTION*
•
UPGRADE FIRMWARE: upgrade the system by using the firmware files
(files format: *.FWP) from the specified folder in the USB flash drive.
•
COPY LOG DATA: Copy the up-to-date log data from the system to the USB flash drive.
Select
USB
functions
[ U S B F U N C T I O N ] S E L E C T U S B F U N C T I O N
U P G R A D E F I R M W A R E