50
v60E - Maritime VSAT Antenna System
(Option 2: Using Other Modems)
1
2
3
No.
Item
Description
1
iDirect Modem
Tx Control
Adjusts the modem frequency to receive optimal signal. Click the
Apply
button
to apply the settings to the system.
• RF Uplink Frequency (MHz): Enters the RF uplink frequency provided by your
satellite operator.
• BUC LO Frequency (MHz): The BUC LO frequency is applied automatically.
The value is assigned according to the satellite band.
• Tx Frequency: The Tx frequency is applied automatically. The value is
RF
Uplink Frequency
value -
BUC LO Frequency
.
• Attenuator (dB): The attenuator is applied automatically.
2
Antenna Angle
Adjusts the antenna angle to receive optimal signal.
• Relative Azimuth: Adjust the relative azimuth angle.
• Absolute Azimuth: Adjust the absolute azimuth angle.
• Elevation: Adjust the elevation angle.
• LNB Pol Angle: Adjust the LNB Pol angle.
3
Test Result List
Enters the test result value received from the satellite operator.
• CPI Value (dB): Enter the CPI value.
• P1 dB Compression: Enter the P1 dB compression
Refer to the following table for a detailed explanation of each menu.
1. Enter the CW signal frequency
provided by your satellite operator
into the
RF Uplink Frequency,
then click the
Apply
button to
transmit the signal. (This CW signal
frequency must be applied to the
modem. The setting process differs
depending on the modem, refer
to the instruction manual of the
modem.)
2. Adjust the
Antenna Angle
.
3. Enter the
Test Result
value received
from the satellite operator.
Click the
Next
button to go to the next
step.
