49
OPERATING THE ACU
Setup Antenna LNB pol Angle
LNB pol angle type
Setup mode
Set pol angle menu
Antenna menu
LNB pol angle Signal
S E T U P M O D E ?
Y E S N O
1. Press LEFT arrow key to move cursor to YES and press OK key to enter SETUP mode.
+ A N T E N N A + S A T E L L I T E
+ S Y S T E M + I N S T A L L A T I O N
2. Press OK key to enter ANTENNA menu.
+ M A N U A L S E A R C H
+ S E T P O L A N G L E
+ S E A R C H P A R A M + S E T P A R A M E T E R S
3. Press RIGHT arrow key to move cursor to SET POL ANGLE menu and press OK key to
enter it.
S E L E C T P O L A N G L E M E NU
C A L I B R A T I O N
4. Press UP and DOWN arrow keys to select the LNB pol angle menu and press OK key to
run the selected operation 'CALIBRATION' or 'MANUAL ADJUST'. Select MANUAL ADJUST
to control LNB pol angle manually. If the control board, LNB pol potentiometer or belt is
replaced, select CALIBRATION to calibrate LNB pol angle.
L N B P O L A N G L E S I G N A L : 1 8 0
2 0
5. Press UP and DOWN arrow keys to increase or decrease the LNB pol angle manually and
the correspondent SIGNAL level will be displayed next to it. Press RETURN key to return to
the main display.
NOTE
: LNB POL ANGLE menu will be displayed only if MANUAL ADJUST is selected.
