5
Installation Site
The MIM should be installed below deck, in a location that is:
• Dry, cool, and ventilated.
• Easily accessible from your main TV viewing area.
• DC plug cable : Connect the DC plug cable to use DC power source
from the i-Series ACU. (The DC out port is supported on the “B4-XXX”
i-Series ACU)
• AC-DC Adaptor : Connect the AC Adaptor if using an AC power source.
Input 100-240V AC 50/60Hz, Output : 12V DC 3.33A
Power Requirements
AC-DC Adaptor
Note:
For your own safety, make sure to disconnect power from all
wired components (i.e., antenna control unit and satellite receiver) before
performing this procedure.
1000mm (39.37”)
350cm (137.8”)
