54
Intellian Satellite TV Antenna Systems
Command Buttons
•
Edit Satellite Information – To change frequency information of the antenna.
•
Satellite Information – Satellite information consists of frequency, symbol and
NID (Network ID) of a transponder in tracking satellite. There are four groups
of satellite information. ‘Vertical/RHCP’ is applied when IRD supply 13V, and
‘Horizontal/LHCP’ is applied when IRD supply 18V. ‘LOW’ is applied when DiSEqC
signal is not detected from IRD, ‘HIGH’ is applied when DiSEqC signal is detected
from IRD. If you select ‘Not Use’ or ‘Change Satellite’, two ‘HIGH’ groups are
inactivated. If you select Change Band’, two ‘High’ groups are activated and you
can modify satellite information which is applied when DiSEqC signal is detected
from IRD. After modifying information, press ‘Edit Satellite Information’ button,
then new information is updated in the antenna.
•
Pol & Band Control – The “Pol” controls 13V (Vertical/ RHCP band) and 18V
(Horizontal/LHCP band). The “Band” controls DiSEqC 0KHz tone (Low band) and
22KHz (High band).
Voltage
DiSEqC
Discription
13V
18V
0KHz
22KHz
AUTO
AUTO
AUTO
AUTO
13V & 18V and DiSEqC 0KHz & 22KHz tone to LNB
AUTO
AUTO
•
13V & 18V and DiSEqC 0KHz tone to LNB
AUTO
AUTO
•
13V & 18V and DiSEqC 22KHz tone to LNB
•
AUTO
AUTO
13V and DiSEqC 0KHz & 22KHz tone to LNB
•
•
13V and DiSEqC 0KHz tone to LNB
•
•
13V and DiSEqC 22KHz tone to LNB
•
AUTO
AUTO
18V and DiSEqC 0KHz & 22KHz tone to LNB
•
•
18V and DiSEqC 0KHz tone to LNB
•
•
18V and DiSEqC 22KHz tone to LNB
