31
17. Select the
Voltage Supply Method*
to LNB.
(AUTO is recommended)
18. Select the
DISEQC Method*.
(AUTO is recommended)
19. input the local frequency of LNB.
Input 10600MHz while Universal LNB in in use.
+ increase the value. - decrease the value.
Change the underscored digit using the +/-
buttons. Press INPUT to accept the value and
move to next digit. Press BACK to move to
previous digit.
Press ENTER to move to next screen.
20. Select the polarization (linear/circular) of
satellite signals.
21. Press YES to save the input information.
Press NO to cancel and return to main setup
mode.
VOLTAGE : AUTO
DISEQC : AUTO
PREV
PREV
-
LIN
YES
NEXT
NEXT
+
CIR
NO
SELECT
SELECT
INPUT
SELECT
LOCAL FREQ : #####MHz
POL : LINEAR
SAVE?
Verification Method*
SIGNAL - use only signal level for tracking
DVB LOCK - use only DVB Lock signal for tracking
DVB DECODE - use DVB decoding for tracking
DSS DECODE - use only DSS Lock signal for tracking
Voltage Supply Method*
AUTO – Supply 13V or 18V to LNB
ONLY 13 V - always supply 13 V to LNB
ONLY 18 V - always supply 18 V to LNB
DISEQC Method*
AUTO – Supply 0KHz tone or 22KHz tone to LNB
ONLY 0 KHz – always supply 0KHz tone to LNB
ONLY 22 KHz – always supply 22KHz tone to LNB
