7
2-1-2. Temperature setting:
Press
or
to set the target temperature directly and at this
moment the temperature starts to twinkle. Press
or
to set the target temperature.
Temperature adjustable range is from 10
℃
~ 35
℃
. (Note: If press
or
without releasing, you
can achieve rapid increasing or decreasing; If there is no pressing, the twinkle would stop after 5
seconds and setting will be finished automatically.)
2-1-3.Timer setting(timer mode):
Long-press
(3 seconds) till the
showed. Same time the clock will turn to 00:00 and start to
twinkle. This means the timer setting starts (as following):
Press
or
to set the timer length by every press with half an hour (30 minutes). The maximum
timer length is 24 hours.
When the timer is over, the unit would enter into standby mode
.
(Note: If press
or
without releasing, you can achieve rapid increasing or decreasing; If there is
no pressing, the twinkle would stop after 5 seconds and setting will be finished automatically.)
You can also set time and temperature same as 2-1-1 and 2-1-2.
Quit from timer mode: long press button
(3 seconds) until the
disappeared. The unit
automatically return back to free normal mode.
(Note: Once the machine exit free program (enter the day, week program, or standby), and then return
to the free program, the unit always enters into the free normal mode first. The original timing model was
automatically canceled).
2-2.running mode selecting:
Press
to get into program selecting (Program No. start to twinkle).
Pressed
or
to select running mode (
-
~
-
)
and then press
to confirm it .
The unit would run following the new selection program. Note: During this period, if there is no pressing,
the selection is automatically completed 5 seconds later.