INTELLI HEAT HALM-FL-LCD 11 User Manual Download Page 2

2

IMPORTANT  SAFEGUARDS

When using an electrical appliance, basic safety precautions should always be observed, including the
following:

READ  ALL  INSTRUCTIONS  BEFORE  USING
WARNING: To reduce the risk of fire, electrical shock, or injury to person:

1. The product is for household use only.
2. Connect the appliance to single-phase AC supply of the voltage specified on the rating plate.
3. In order to avoid overheating do not cover the heater.
4. Never leave the heater unattended while it is in use. Always turn the product to the OFF position and
unplug it from the electrical outlet when not in use.
5. Extreme caution is necessary when any heater is used by or near children, invalids or elderly person
and whenever the heater is left operating and unattended.
6. The heater must not be located immediately below an electrical Socket-outlet.
7. Do not run cord under carpeting and do not cover cord with throw rugs, runners or the like. Arrange
cord away from traffic area and where it will not be tripped over.
8. Do not operate the heater with a damaged cord or plug, or after the heater malfunctions, has been
dropped, or damaged in any manner.
9. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly
qualified person in order to avoid a hazard.
10. Avoid the use of an extension cord as this may overheat and cause a risk of fire.
11.  Use  the  heater  in  a  well-ventilated  area.  Do  not  insert  or  allow  objects  to  enter  any  ventilation  or
exhaust opening. To prevent a possible fire, do not block air intakes or exhaust openings in any manner.
Do not use on soft surfaces, like a bed, where openings may become blocked. Use the heater on flat, dry
surfaces only.
12. Do not place this heater near flammable materials, surfaces or substances, as there may be a risk of
fire.  Keep  the  above  flammable  materials,  surfaces  or  substances  at  least  1m  from  the  front  of  the
product  and  keep  them  away  from  the  sides  and  rear.  13.  Do  not  use  the  heater  in  any  areas  where
petrol, paint or other flammable liquids are stored e.g. Garages or workshops as a hot, arcing or sparking
parts  inside  the  heater.
14. Don’t use this heater in the immediate surroundings of a bath, a shower or a swimming pool with
floor standing mode. Never locate the heater where it may fall into bathtub or other water container.
15. Never touch the heater with wet hand. The heater should be installed so that can not be touched by a
person using a bath or shower.
16. This heater is hot when in use. To avoid burns and personal injury, do not let bare skin touch hot
surfaces.
17. Before moving the heater, please must unplugged it and let it cool down for 15 minutes. If provided,
use handles when moving the product.
18. Be sure that no other appliances are in use on the same electrical circuit as your product as an
overload can occur.
19.This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental  capabilities,  or  lack  of  experience  and  knowledge,  unless  they  have  been  given  supervision  or
instruction concerning use of the appliance by a person responsible for their safety.
20.Children should be supervised to ensure that they do not play with the appliance.
21. This heater is filled with a precise quantity of special oil.
22. Repair requiring opening of the oil container are only to be made by the manufacturer or his service
agent who should be contacted if there is an oil leakage.

23. Regulations concerning the disposal of oil when scrapping the appliance have to be followed.

FOR HOUSEHOLD USE ONLY - SAVE  THESE  INSTRUCTIONS

Summary of Contents for HALM-FL-LCD 11













Reviews: