5
Connect the BLACK WIRE to any EARTH, LIVE or NEUTRAL terminal. The black wire must only
be used for connection to an external Pilot-Wire Programmer. Connection of the black wire to any other
terminal will destroy the thermostat. If the black wire is not used for connection to a Pilot-Wire
programmer, it must be properly insulated and isolated. This appliance is Double Insulated, therefore
it must not be Earthed. The cable contains: (BROWN: Live) (GREY/BLUE: Neutral) (BLACK: the Signal Wire).
This product is safe and water resistant. Nevertheless, do not touch the radiator or
the thermostat when any part of you is wet. This product is for interior use only.
Ensure turned off at the main power source, and clean with a soft, non
abrasive damp cloth. Never allow water to splash onto any part of the appliance.
Do not lay any material over the radiator, especially if it is damp or wet. Never place
any object against the radiator. Always ensure that the radiator is installed in an open
area to allow the warmth to be radiated and not where curtains will be drawn over it.
Although this product is designed to ensure safety and ease of use, like with any other
electrical or heating product, always exercise caution where children are concerned.
We strongly advise you not to allow children or any unsuitable person to operate the
controls or to tamper with any electrical connection.
Never pull, sit on, hang from or load the radiator with any weight. Such practice may
damage the radiator or cause it to come loose from the wall or the wall fitting
attachments, which could cause serious injury. Also, to avoid such injury, check from
time to time to ensure that the radiator is securely fixed to the wall.
Never attempt to alter or modify this product, paint it, or apply stickers. This will
invalidate the warranty and may cause the product to malfunction or personal injury.
1. INTELLI HEAT Ltd or any associated company or person cannot be held responsible for any fault, damage, or personal
injury caused if these instructions have not been fully adhered to, or where non-original materials or accessories
have been used. Non observance to these guidelines and all applicable regulations may invalidate the warranty.
2. This radiator is filled with a special Thermodynamic Fluid. Any repair involving opening the access to this fluid must
be carried out by an electrician approved by the manufacturer. The manufacturer must be contacted in the unlikely
event of any leakage of this fluid. Please note that all regulations for the disposal of heating fluid and electrical
appliances must be fully adhered to.
3. If the cable or any other electrical part fails or becomes damaged, repair or replacement must be carried out by an
electrician approved by the manufacturer, or by a suitably qualified, experienced electrician familiar with such
products who has the necessary instructions.
4. This product must not be positioned below an electrical socket and all applicable regulations relating to the
installation of electrical appliances must be fully adhered to. See pages 4 & 6 for further information and guidance.
5. During operation, it is normal for the radiator to make minor clicking sounds due to metal expansion/contraction,
and for one end fin, or one each side not to heat up, this allows the flow and expansion of the thermodynamic fluid.
Summary of Contents for CALI Avanti
Page 14: ...14 ...