Intelix
Audisey
Athena
Installation Manual
www.intelix.com
9
Connecting Digital Audio
1)
Using a 75 ohm coaxial digital audio cable (not included),
connect one end of the cable to the coaxial SPDIF (
S
ony
P
hillips
D
igital
I
nterface) connector on the source device.
2)
Connect the other end of the coaxial cable to the SPDIF In 1 or
In 2 (In 1 uses audio input channels 1 and 2, and In 2 uses audio
input channels 5 and 6).
Note: The SPDIF inputs and outputs must be activated in the
Athena Designer Software.
Connecting 70 volt Speaker Outputs
For 70 volt systems, the Intelix 70V-AM transformer module must
be purchased separately. Each 70V-AM provides eight channels of
outputs. Two 70V-AM modules are required for an Athena-16
system.
