7
3.1. Detection range
Upper view
90°
Distance (m)
Side view
1,8 m ~ 2,20 m
Height (m)
4. Installing the smart IVP 4101 PET sensor
Before starting the installation it is necessary to define the height of installation of the sensor. We recommend that this
sensor is installed as per the table below.
d
h
Distance (d)
Pet
Installation height (h)
Less than or equal to 4 m
Without the presence of a pet
1,8 to 2 m
With the presence of a pet
Greater than 4 m up to 12 m
With the presence of a pet
2,1 to 2,2 m
Without the presence of a pet
1,8 to 2,2 m
Note:
to install the IVP 4101 PET smart sensor, make sure that the battery is not connected to the board.
The sensor IVP 4101 PET smart does not have an articulator. So for your installation, follow the procedure below:
»
Step 1:
remove the lower front cover from the sensor.
