11
Jumper P.COUNT
Position
Condition
1 P
1 Pulse – maximum sensitivity
2 P
2 Pulse - medium sensitivity
3P
3 Pulse - minimum sensitivity
Jumper relay
Position
Condition
NC
Normally closed
NO
Normally open
Jumper LED
Position
Condition
Closed
LED on
Open
LED off
6. Test
When energized, the LED lights on, indicating that the self-test has been activated
by the sensor.
It performs the walk-through test, with transversal movements to sensor detection,
by observing the LED indication.
Note:
while a movement could be detected, the LED remains on and will indicate
open or closed.
Walk through the area where you want to protect to check if it is within the area
covered by the sensor. The sensor sensitivity and its installation position will define
the coverage area.
Sensor
4m
Sensor
4 m
