8
» Install it in the location to be protected using the screw locations as shown in the following figures:
Wall mount
seals
Seals for
installation in
corners
» Close the case by snapping on the top of the front cover first and descending perpendicularly towards the bottom of
the sensor.
Important:
the IVP 1000 Pet SF was designed for indoor and closed areas and with the presence of animals of up to 20
kg, so do not use it for protection of outdoor or open areas and with the presence of animals of more than 20 kg.
5. Sensitivity setting
The sensor has a selector switch for sensitivity adjustment, where it is possible to adjust between the 3 detection levels.
»
1P:
maximum sensitivity for motion detection;
»
2P:
medium sensitivity (factory default);
»
3P:
minimum sensitivity for greater robustness against accidental shot.
