Intel Xeon 3500 Series Datasheet Download Page 23

Page: 23 / 106

Intel® Xeon® Processor 3500 Series Datasheet Volume 1

Electrical Specifications

2.11.1

DC Voltage and Current Specification

Table 2-7.

Voltage and Current Specifications

Symbol

Parameter

Min

Typ

Max

Unit

Notes

Notes:

Unless otherwise noted, all specifications in this table are based on estimates and simulations or empirical

data. These specifications will be updated with characterized data from silicon measurements at a later date

VID

VID range

0.8

—

1.375

Each processor is programmed with a maximum valid voltage identification value (VID), which is set at

manufacturing and can not be altered. Individual maximum VID values are calibrated during manufacturing

such that two processors at the same frequency may have different settings within the VID range. Please

note this differs from the VID employed by the processor during a power management event (Adaptive

Thermal Monitor, Enhanced Intel SpeedStep

Technology, or Low Power States).

Processor

Number

W3580

W3570

W3550

W3540
W3520

for processor core

3.33 GHz

3.20 GHz

3.06 GHz

2.93 GHz
2.66 GHz

See

Table 2-8

and

Figure 2-3

3,4

The voltage specification requirements are measured across VCC_SENSE and VSS_SENSE lands at the

socket with a 100 MHz bandwidth oscilloscope, 1.5 pF maximum probe capacitance, and 1 M

minimum

impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external

noise from the system is not coupled into the oscilloscope probe.

Refer to

Table 2-8

and

Figure 2-3

for the minimum, typical, and maximum V

allowed for a given current.

The processor should not be subjected to any V

and I

combination wherein V

exceeds V

CC_MAX

for

a given current.

TTA

Voltage for the analog portion of the

integrated memory controller, Intel QPI

link and Shared Cache

See

See

for details on V

Voltage Identification and

Table 2-9

and

Figure 2-4

for details on the V

Loadline.

TTD

Voltage for the digital portion of the

integrated memory controller, Intel QPI

link and Shared Cache

See

Table 2-9

and

Figure 2-4

DDQ

Processor I/O supply voltage for DDR3

1.425

1.5

1.575

CCPLL

PLL supply voltage (DC + AC

specification)

1.71

1.8

1.89

Processor

Number

W3580

W3570

W3550

W3540
W3520

for processor

3.33 GHz

3.20 GHz

3.06 GHz

2.93 GHz
2.66 GHz

—

145

145
145

145

CC_MAX

specification is based on the V

CC_MAX

loadline. Refer to

Figure 2-3

for details.

TTA

Current for the analog portion of the

integrated memory controller, Intel QPI

link and Shared Cache

—

TTD

Current for the digital portion of the

integrated memory controller, Intel QPI

link and Shared Cache

—

DDQ

Processor I/O supply current for DDR3

—

DDQ

Processor I/O supply current for DDR3

while in S3

—

This spec is based on a processor temperature, as reported by the DTS, of less than or equal to Tcontrol-25.

CC_VCCPLL

PLL supply current (DC + AC specification)

—

1.1

Summary of Contents for Xeon 3500 Series











































































































Search results

Summary of Contents for Xeon 3500 Series

Reviews:

Related manuals for Xeon 3500 Series

Brands by name

Popular brands

Intel Xeon 3500 Series, Datasheet

Search results

Summary of Contents for Xeon 3500 Series

Reviews:

Related manuals for Xeon 3500 Series

Brands by name

Popular brands