•
Insert the Intel CD-ROM into your CD-ROM drive. The
New
Hardware Found Wizard
searches for the correct driver files and
copies them to your hard drive. If the Intel® PRO Network
Connections menu screen appears, leave it open.
•
If a Windows Logo testing dialog appears, click
Continue Anyway
.
•
When
the
My WLAN Places
screen appears, click
Next
. You will
return to this configuration screen later to configure wireless
settings.
•
On
the
Found New Hardware Wizard
screen, click
Finish
.
•
Click
Start
,
Settings
, and
Control Panel
.
•
Double-click
Network Connections
.
•
In
the
LAN or High-Speed Internet
window right-click the
Wireless
Network Connection
and select
Properties
.
•
Select
the
Wireless Network
tab.
•
Click to clear the check box
Use Windows to configure my
wireless network settings
,
then click
OK
on the
Wireless
Network
tab. Do not click any other tabs.
•
In
the
LAN or High-Speed Internet
window right-click the
Wireless
Network Connection
and select
Properties
.
•
Select
the
General
tab and click
Configure
.
•
Select
the
My WLAN Places
tab.
o
click
OK
to install using the default profile or
o
click
New
to set up a profile using configuration information
obtained from your network administrator. Type a configuration
name and the SSID for your wireless network. Set up security
and other parameters if required. Consult your network
administrator. Click
OK
to close the dialog. Click
OK
to finish
setting up the profile. Close the
LAN or High Speed Internet
window.
•
Proceed
to
Step 4
.
Windows 2000
You must be logged on as an administrator or member of the
administrator’s group to install a new device under Windows 2000.
•
The
Found New Hardware Wizard
dialog displays. Click
Next
. The
Install Hardware Device Drivers
dialog displays.
•
Insert the Intel CD-ROM into your CD-ROM drive. If the Intel® PRO
Network Connections menu screen appears, leave it open.
•
On
the
Install Hardware Device Drivers
screen verify that
Search
for a suitable driver for my device (recommended)
is selected,
then click
Next
.
•
The
Locate Driver Files
dialog appears. Select
Specify a
location
, select
CD-ROM
and click
Next
.
•
The
Adapter Properties
screen displays. On the
Settings
tab:
o
click
OK
to install using a default profile or
15
