FLIK Getting
Started Guide
13
www.terasic.com
April 30, 2020
2.1
Hardware Requirement
A Host PC with Thunderbolt 3 Port is required to perform FLIK function Tests.
The PC should be:
Built-in Thunderbolt 3 Port or with Thunderbotl3 Card Installed.
Windows/Linux Installed
Thunderbolt 3 driver installed
A FLIK kit
A Thunderbolt 3 Cable as shown in
Figure 2-2 Thunderbolt 3 Cable
2.2
Thunderbolt 3 Test
Below shows the procedure when the FLIK is first time to plug into the thunderbolt 3
port of the Host PC.
1.
Make sure your Host PC had installed Thunderbolt 3 Driver.
2.
Plug 12V DC to FLIK to power on the FLIK.
3.
Connect FLIK and host PC by a Thunderbolt 3 cable.
