8
Intel
®
SRCU41L Raid Controller User Manual
Hardware Installation
Select a PCI slot and align the Intel
®
Raid Controller SRCU41L PCI bus connector to the slot.
Press down gently but firmly to ensure that the card is properly seated in the slot, as shown in
Figure 3
. Then screw the bracket into the computer chassis.
6. Set the Target IDs.
Set target identifiers (TIDs) on the SCSI devices. Each device in a channel must have a unique
TID. Provide unique TIDs for non-disk devices (CD-ROM or tapes), regardless of the channel
where they are connected. The Intel
®
Raid Controller SRCU41L automatically occupies TID
7, which is the highest priority. The arbitration priority for a SCSI device depends on its TID.
Figure 3. Inserting the Intel
®
SRCU41L Raid Controller in a PCI Slot
Bracket Screw
32-bit Slots (3.3 V)
64-bit Slots (5 V)
Press Here
Press Here
Edge of
Motherboard
Table 2. Target IDs
Priority
Highest
Lowest
TID
7
6
5
. . .
2
1
0
15
14
. . .
9
8
