11
Intel® RAID Controller SRCSASJV Hardware User’s Guide
Technical Specifications
Specification
Intel
®
RAID Controller SRCSASJV
Processor
LSI* 1078 Integrated RAID on Chip 500 MHz
Operating voltage
+3.3 V, +12 V
Card size
Low profile, extended half-length (7.71-inch x 2.536-inch)
Array interface to host
PCI Express* Rev 1.0A, x8 lane width
SATA bus speed
3 Gbps per port, point-to-point
Serial port
3-pin RS232-compatible connector for debug use only
SAS controller
LSI 1078
SAS/SATA ports
2x4 internal ports, SFF8087, 2x4 external ports SFF8088
Physical and virtual drive
support
2x4 ports total: 240 drives per controller; 64 virtual drives per
controller; 240 hot spares per controller (global and/or
dedicated)
Cache
DDR2 667 MHz SDRAM, optional battery backup
Firmware
4 MB in reflashable flash ROM
Compatible devices
2.5-inch and 3.5-inch SAS or SATA 3 GB drives; non disk
devices including expanders. Can support drives of mixed
capacity.
Cabling
Small, thin cables do not restrict airflow; Shared connectors for
multiple drives
Redundant configuration
32 Kb NVRAM and config-on-disk (COD)
Enclosure management
in-band and out-of-band
Enclosure support
Assumes one SEP per enclosure
Array support
128 arrays per controller; 16 drives per array; 16 virtual drives
per array.
