User Serviceable Platform Components
156
Intel® Server Platforms SR6850HW4 and SR6850HW4/M Product Guide
Installing or Removing the Fibre Channel Module
Removing the Fibre Channel Module
1.
Observe the safety precautions, warnings, and cautions described in “
2.
Turn off all peripheral devices connected to the system.
3.
Power down the system and unplug both AC power cords.
4.
Remove the top cover. For instructions, see “
5.
Disconnect all cables attached to the Fibre Channel Module.
6.
Remove the memory board or memory board air baffle from Slot C. For instructions, see “
7.
Push the retention lever at the rear of the Fibre Channel Module slot into the open position. See
letter “A” in Figure 74.
8.
Pull up on the Fibre Channel Module to remove it. See letter “B” in the figure.
TP01497
B
A
C
Figure 74. Removing a Fibre Channel Module
