Intel SR2600UR - Server System - 0 MB RAM, Service Manual

Page: 138 / 234

118 Intel
®
Server System SR2600UR/SR2625UR Service Guide
Installing the Server Board
To install the server board, follow these steps:
1. Place the server board into the server system (see letter “A” in Figure 110 ).
2. Attach the server board with nine screws (see letter “B” in Figure 110 ).
Figure 110. Installing the Server Board
3. Connect all power cables to the server board.
4. Install memory. For instructions, see
“Installing DIMMs” on page 58 .
5. Install the processor(s). For instructions, see “Installing the Processor” on page 59 .
6. Install processor heatsink(s). For instructions, see “Installing the Heatsink(s)” on
page 62 .
7. Install the fan module assembly. For instructions, see “Replacing a Fan Module” on
page 127 .
8. Install the large air baffle. For instructions, see “Installing the Large Air Baffle” on
page 70 .
9. Install the bridge board. For instructions, see step 6 in “Installing the Midplane
Board” on page 104 .
AF002981
A
B