Intel® Entry Server Board SE7221BK1-E User Guide
Hardware Installations and Upgrades
15
Removing the Processor
To remove the processor, follow these instructions:
1.
Observe the safety and ESD precautions previously listed.
2.
Use a flat blade screwdriver to turn each connector 1/4 turn so it pops out of the server board.
Lift firmly since TIM may create some "stickiness" between heat sink and processor.
3.
Lift the heat sink from the processor.
4.
Lift the processor lever.
5.
Remove the processor. Hold it by the edges only.
6.
Return the processor cover to the processor and the PnP to the socket while not in use.
Figure 11. Heat Sink Snap
TP01360
