background image

Intel® Server Chassis SC5400 User’s Guide

ix

Additional Information and Software

If you need more information about this product or information about the accessories that 

can be used with this server chassis, use the following resources.  These files are available 

at 

http://support.intel.com/support/motherboards/server/chassis/SC5400/

.

Unless otherwise indicated in the table below, once on this Web page, type the document 

or software name in the search field at the left side of the screen and select the option to 

search "This Product."

For this information or 

software

Use this Document or Software

For in-depth technical 

information about this 

product, including BIOS 

settings and chipset 

information

IIntel

® 

Server Chassis SC5400 Technical Product Specification

If you just received this 

product and need to install 

it

Intel

® 

Server Chassis SC5400 Quick Start User's Guide

 in the 

product box

For virtual system tours 

and interactive repair 

information

A link to the SMaRT Tool is available under "Other Resources" at the 

right side of the screen at:

http://support.intel.com/support/motherboards/server/chassis/

SC5400/

Accessories or other Intel 

server products

Spares and Configuration Guide

Hardware (peripheral 

boards, adapter cards) and 

operating systems that 

have been tested with this 

product

Tested Hardware Operating Systems List

 

For software to manage 

your Intel

®

 server

Intel

®

 System Management Software

For diagnostics test 

software

Diagnostics

Summary of Contents for SC5400



















































































































































Reviews: