Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide
35
component side up on to a grounded anti-static surface or conductive foam pad.
Do not
place electronic
devices on to the outside of any protective packaging.
5.1
RAID Adapter Installation
5.1.1
Requirements
The following items are required to install an Intel® RAID Adapter:
•
Intel® RAID Adapter
•
Intel server board based server system with an empty PCIe slot and a Supported Backplane
•
Internal Tri-Mode data cables. These cables have one dual SF- SFF-8643 on one end and two oculink
connectors on the other end.
•
SAS, SATA or NVMe drives
5.1.2
Packing List
1 – Intel RAID Module w/snap-on bumper (Pre-Installed)
4 – White Plastic Barrel Stand-offs
4 – White Plastic Locking Pins with pull-tab
Note
: Intel RAID Products do not include data cables. Appropriate Tri-Mode data cables may be included
with your server system or must be purchased separately.
5.2
RAID Adapter Installation
5.2.1
Requirements
The following items are required to install an Intel® RAID Adapter:
•
Intel® RAID Adapter
•
Intel server board based server system with support for an Intel Integrated RAID Adapter
•
Internal SAS/SATA data cables
•
SAS drives or SATA drives
5.2.2
Packing List
1
– Intel RAID Adapter
2– Low profile mounting bracket
3 – Attention Document
4 – Warranty Document
Note
: Intel RAID Products do not include SAS / SATA data cables. Appropriate SAS / SATA data cables may
be included with your server system or must be purchased separately.
5.2.3
Installation Instructions
1.
Unpack the Intel® RAID Adapter.
Unpack your RAID Adapter. Inspect it for damage. If it appears damaged, contact your Intel Customer and
Technical Support representative.
2.
Turn off the power to the computer, and disconnect the AC power cord.
3.
Remove the computer cover. Refer to the system documentation for instructions.
4.
Install the RAID Adapter.
a)
Remove the riser card (the adapter can be installed on any riser card)
b)
Remove the filler panel
