Intel RS2BL080 - RAID Controller Hardware User'S Manual Download Page 3

Page: 3 / 44

Intel® RAID Controller RS2BL080 Hardware User’s Guide

iii

Preface

This is the primary hardware guide for the Intel

RAID Controller RS2BL080, which can

be used for SAS and SATA disk drives. It contains installation instructions and

specifications.

For details on how to configure the storage adapters, and for an overview of the software

drivers, see the

Intel

RAID Software User’s Guide

on the Resource CD.

Audience

This document assumes that you have some familiarity with RAID controllers and related

support devices. The people who benefit from this book are:

• Engineers who are designing an Intel

RAID Controller RS2BL080 for a system.

• Anyone installing an Intel

RAID Controller RS2BL080 in a RAID system.

Organization

This document includes the following chapters and appendixes:

• Chapter 1 provides a general overview of the Intel

RAID Controller RS2BL080.

• Chapter 2 describes the procedures for installing the RAID controller.
• Chapter 3 provides the characteristics and technical specifications for the Intel

RAID Controller RS2BL080.

• Appendix A explains drive roaming and how to do a drive migration.

Related Publication

The

Intel

RAID Software User’s Guide

is on the Resource CD that ships with the RAID

controller.

Summary of Contents for RS2BL080 - RAID Controller













































Search results

Summary of Contents for RS2BL080 - RAID Controller

Reviews:

Related manuals for RS2BL080 - RAID Controller

Brands by name

Popular brands

Intel RS2BL080 - RAID Controller, Hardware User'S Manual

Search results

Summary of Contents for RS2BL080 - RAID Controller

Reviews:

Related manuals for RS2BL080 - RAID Controller

Brands by name

Popular brands