Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
85
Non-Intel GPGPU Support Disclaimer:
Intel incorporates necessary features and conducts appropriate thermal testing of its server systems to ensure the thermal requirements of Intel
®
Xeon Phi™ coprocessor cards can be supported when the documented support criteria are met.
Intel can make support recommendations for non-Intel GPGPU cards listed on its Tested Hardware and Support List, based on the same support
criteria. However, Intel cannot guarantee its server systems can meet the thermal requirements of these non-Intel high power add-in cards. System
integrators should verify non-Intel GPGPU add-in card air flow and thermal requirements from vendor specifications before integrating them into the
system. It is the responsibility of the system integrator to conduct appropriate system testing on server systems configured with a non-Intel GPGPU
card to ensure reliable operation.
For non-Intel GPGPU cards listed on Intel’s tested hardware and OS list, Intel will provide best internal support efforts to duplicate and understand
reported issues. However, Intel cannot guarantee an issue will be root caused nor that a fix can be made available to correct it.
Intel Product Code
Order Information
Product Description
Product Type
iPC – AWTCOPRODUCT
MM# – 934988
UPC – 00735858283328
EAN – 5032037064385
MOQ – 1
2U High Air flow Air Duct Kit
Required 2U accessory kit when installing an Intel® Xeon Phi™
coprocessor card with passive heat sink (heat sink only, no fan)
Kit Includes:
(1) High air flow air duct
(1) Metal shipping bracket
(2) Non-intel GPGPU secure mounting adapters
Note: Intel Xeon Phi cards with active heat sinks are NOT supported in
systems confgured with the high air flow air duct.
Note: Systems configured with any type of Intel® Xeon Phi™ card and/or
non-Intel GPGPU card must have the shipping bracket installed before
the system is exposed to any level of shock or vibration or is shipped to
the end user location. Failure to install the shipping bracket has the
potential to cause serious damage to various components within the
system.
•
2U Accessory Kit
•
Each Intel
®
Xeon Phi™ coprocessor card and non-Intel GPGPU card must be installed into the top x16 slot of a 2-Slot PCIe* Riser card. With a 2-slot riser card
installed, the embedded fan speed control will operate system fans at a higher speed. 3-slot riser cards (as shipped in the standard platform configuration)
cannot be used due to air flow and thermal limitations.
