Intel
®
Server System R1000WF Product Family System Integration and Service Guide
24
3.
Remove the processor clip sub-assembly from the heat sink:
Figure 37. PHM Disassembly
Insert the head of a flat head screw driver in-between the heat sink and the processor clip assembly
and gently twist until the bond between heat sink and the processor is broken.
Unlatch the hooks on each corner of the processor carrier clip to free the processor carrier from the
heat sink
Figure 38. Releasing the Processor Carrier Clip from the Heat Sink
Carefully lift the processor sub-assembly from the heat sink
Remove the processor from the processor clip by carefully pushing back one of the latches located
on the ends of the processor and rotating the processor up and out of the processor carrier clip
Figure 39. Releasing Processor from Carrier Clip
