Hardware Installations and Upgrades
22
Intel
®®
Server System R1000BB Service Guide
1.
Open the Socket Lever. Push the level handle down and away from the socket to release it (see
letter “A”). Rotate the lever open all the way (see letter “B”).
Figure 27. Installing Processor – Open the Socket Lever
2.
Open the Load Plate. Press the locking lever slightly to raise the load plate (see letter “A”).
Open the load plate all the way (see letter “B”).
Figure 28. Installing Processor – Open the Load Plate
3.
Install the Processor. Take the processor out of the box and remove the protective shipping
cover. Orient the processor with the socket so that the orientation notches on the processor
align with the two orientation posts on the socket (see letter “A”).
Figure 29. Installing Processor – Install the Processor
Note: The underside of the processor has components that may damage the socket pins if installed
improperly. Processor must align correctly with the socket opening before installation. DO NOT
DROP processor into socket!
4.
Press the protective cover to remove it from the load plate. Close the Load Plate and Socket
Lever.
