6
Connectors
PS/2(Bottom) PS/2
Keyboard(Purple)
PS/2(TOP)
PS/2 Mouse Header(Green)
R_USB1
USB1/2 Connector Port
F_USB2
USB3/4 Connector Port
F_USB3
USB5/6 Connector Port
LPT
Printer Connector Port
COM1
Serial Port COM1 Connector port
VGA On-board
VGA
connector
LINE OUT/
LINE IN/MIC
Audio Output/Audio Input/Microphone
IDE
Primary/Secondary IDE port
SATA1/SATA2 SATA
Port
FDD
Floppy Disk Drive Connector Port
ATX/ATX_12V
ATX/ATX_12V Power Supply Connector
port
CPU_FAN/PWR_FAN
CPU/System FAN Port
Function Port Panel
Power Supply LED
Pin2: Power Supply Anode;
Pin4: Ground
HHD LED
Pin1: Power supply Anode
Pin3: LED Signal
Power Supply Switch
Pin6
、
8:Switch Signal
Reset Switch
Pin5
、
7:Reset Switch
Chapter 5 BIOS Setup
The BIOS setup Utility record settings and information of your computer,
such as date and time, the type of hardware installed, and various configuration
settings.
Your computer applies those information to initialize all the
components when booting up and basic function of coordination between system
components.
If the Setup Utility configuration is incorrect, it may cause the system to
malfunction. It can even stop you computer booting properly. If it happens, you
can use the clear CMOS jumper to clear the CMOS memory which has stored
the configuration information; or you can hold down the Page
Up Key while rebooting your computer.
Holding down the
Page Up key also
clears the setup information.