Intel PM945GC-478, User Manual, Page: 14 / 15

13
Setup UART mode select
— UR2 Duplex Mode Default: Half
— Onboard Parallel port Default: 378
/
IRQ7
Setup select parallel port
— Parallel Port Mode Default: SPP
Setup parallel port mode
— ECP Mode USE DMA Default: 3
— PWRON After PWR=Fail Default: off
5.6 Power Management Setup
— ACPI Function Default: Enabled
Setup if use ACPI function
— ACPI Suspend Type Default: S1 (POS)
— Power Management Default: User Define
— Video off Method Default: DPMS
— Video off In Suspend Default: Yes
— Suspend Type Default: Stop Grant
— MODEM Use IRQ Default: 3
—
Suspend Mode Default: Disabled
— HDD Power Down Default: Disabled
— Soft-Off by PWR-BTTN Default: Instant-Off
— Wake-up by PCI card Default: Disabled
— Power On by Ring Default: Disabled
— Resume by Alarm Default: Disabled
Date (of Month) Alarm Default: 0
— Time (hh:mm:ss) Alarm Default: 0
** Reload Global Timer Events **
— Primary/Secondary IDE 0/1 Default: Disabled