36
The BIOS attempts to load the operating system from the devices in the sequence selected in
these items. The settings are Floppy, LS120, Hard disk, CDROM, ZIP100,USB-FDD,
USB-ZIP, USB-COROM, Legacy LAN and Disabled.
Boot Other Device
The settings are: Enabled and Disabled.
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks.
360K type is 40 tracks while 760K, 1.2M and 1.44M are all 80 tracks.
Boot Up NumLock Status
The default value is On.
On
(default)
Keypad is numeric keys.
Off
Keypad is arrow keys.
Security Option
This category allows you to limit access to the system and Setup, or just to Setup.
System
The system will not boot and access to Setup will be denied if the
correct password is not entered at the prompt.
Setup
(default)
The system will boot, but access to Setup will be denied if the correct
password is not entered prompt.
MPS Version Control For OS 1.4
This option is only valid for multiprocessor motherboards as it specifies the version of the
Multiprocessor Specification (MPS) that the motherboard will use.
OS Select For DRAM > 64MB
Allows OS2
®
to be used with >64MB or DRAM. Settings are Non-OS/2 (default) and OS2.
Set to OS/2 if using more than 64MB and running OS/2
®
.
HDD S.M.A.R.T Capability
The settings are: Disabled and Enabled.
Full Screen Logo (EPA) Show
The selection is for you to choose the EPA Full Screen logo to show or not.
3-6 Advanced Chipset Features
The Advanced Chipset Features Setup option is used to change the values of the chipset
registers. These registers control most of the system options in the computer.
Phoenix – AwardBIOS CMOS Setup Utility
Advanced Chipset Features
Item Help
System BIOS Cacheable Disabled
Memory Hole at 15-16M Disabled
PCI Press Root Port Function Press enter
VT-d Disabled
***VGA Settings***
PEG/On-Chip VGA Control Auto
Force PEG to x1 Disabled
DrMT Mode Enabled
Total GFX Memory 256 MB
PAVP Mold Disabled
Menu Level >
