Intel NUC Kit DN2820FYKH User Guide
4
2.
Lift up the hard drive bracket and set it over the edge of the chassis to expose the motherboard.
Installing and Removing Memory
Intel NUC Kit DN2820FYKH has one 204-pin DDR3L SO-DIMM socket. Memory requirements:
1.35V low voltage memory
1066 MHz SO-DIMM on the Intel Celeron processor N2820
1333 MHz SO-DIMM on the Intel Celeron processor N2830
Non-ECC
For a list of tested memory, go to the
page on the Support site.
Install SO-DIMMs
To install a SO-DIMM, follow these steps:
1.
Observe the precautions in "Before You Begin" on page 2.
2.
Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
