94
Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual
Using the Web Console
Admin and User Privileges
There are two levels of user privileges: Admin and User. Some menu selections available to users
with Admin privileges are not be available to those with User privileges.
The table summarizes the Admin and User privileges:
After establishing a User Account with Admin-level privileges, highlight Save Changes and press
Enter
. The switch will save any changes to its non-volatile RAM. You can now log in as that user
and continue configuring the switch.
Saving Changes
The ZT 8101 has two levels of memory; normal RAM and non-volatile or NV-RAM.
Configuration changes are made effective when you click the Apply button. When you do this, the
settings are immediately applied to the switching software in RAM and immediately take effect.
Some settings, though, require you to restart the switch before they will take effect. Restarting the
switch erases all settings in RAM and reloads the stored settings from the NV-RAM. Thus, it is
necessary to save all setting changes to NV-RAM before rebooting the switch.
To retain any configuration changes permanently
1. In the left panel, click Save Changes.
2. Click Save Configuration.
A message appears verifying that your new settings have been saved to NV-RAM.
Once the switch configuration settings have been saved to NV-RAM, they become the default
settings for the switch. These settings will be used every time the switch is rebooted. You can use
the Factory Reset option to return the switch to its factory configured settings.
Admin
User
Switch Configuration Management
Configuration
Yes
Read Only
Network Monitoring
Yes
Read Only
SNMP Community Strings and Trap Stations
Yes
Read Only
Update Firmware and Configuration Files
Yes
No
Ping
Yes
Yes
BOOTP/DHCP Relay and DNS Relay
Yes
Read Only
Factory Reset
Yes
No
Reboot Switch
Yes
No
Advanced Setup
Yes
Read Only
User Account Management
Add/Update/Delete User Accounts
Yes
No
View User Accounts
Yes
No
