116
Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User’s Manual
Using the Web Console
3. Configure these following fields for each port group.
4. Click Apply.
To configure advanced traffic control
Advance traffic control sets the threshold for the amount of traffic a port can handle before
triggering flow control. You must enable flow control on the ports before you can set a flow control
threshold. (To enable flow control, see Port Configurations.)
1. In the left panel, click Forwarding.
2. In the top panel under MAC Forwarding, click Advance Traffic Control.
3. Select the port you want to configure and click Edit.
4. In the Flow Control Threshold field, enter a value from 2—57344.
5. If you want this setting to apply to more than the selected port, select a group of ports in the
Configure Port from field.
6. Click Apply.
The table displays this information about the ports:
To configure static IP routes
1. In the left panel, click Forwarding.
2. In the top panel under IP Forwarding, click Static/Default Routes.
3. Click New and configure these fields.
Field
Description
Upper Threshold (Kpps)
Specifies, in thousands, the number of broadcast or multicast packets per
second a port can receive before triggering a storm control response.
Broadcast Storm Mode
Enables or disables storm control for broadcast packets.
Multicast Storm Mode
Enables or disables storm control for multicast packets.
Field
Description
Port
The port number.
Flow Control Threshold
The current value of the flow control threshold.
Drop Packet
A status field that indicates whether the port is currently dropping packets.
Flow Control Status
A status field that indicates whether the port is currently implementing flow
control.
Port Connection
A status filed that indicates the port’s speed, duplex mode, and flow control
mode.
Field
Description
IP Address
Specifies the IP address to be statically entered into the IP forwarding table.
