background image

2

Revision History

Date

Rev

Modifications

9/2/98

1.0

Initial release

  Intel Corporation 1998

Information in this document is provided in connection with Intel products. No license, express  or implied, by  estoppel or
otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of
Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale
and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or
infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life
saving, or life sustaining applications.  Intel may make changes to specifications and product descriptions at any time, without
notice.

The N440BX may contain design defects or errors known as errata which may cause the product to deviate from published
specifications. Current characterized errata are available on request.

Pentium is a registered trademark and MMX is a trademark of Intel Corporation.

* Third-party brands and names are the property of their respective owners

Summary of Contents for N440BX












Reviews: