Intel Motherboard Raptor AT, Installation Manual

Page: 9 / 80

Introduction
VII
Warranty
This product is warranted against material and manufacturing defects
for two years from the date of delivery. Buyer agrees that if this
product proves defective the manufacturer is only obligated to repair,
replace or refund the purchase price of this product at manufacturer's
discretion. The warranty is void if the product has been subjected to
alteration, misuse or abuse; if any repairs have been attempted by
anyone other than the manufacturer; or if failure is caused by accident,
acts of God, or other causes beyond the manufacturer's control.
Raptor AT - An Overview
The Raptor AT represents the ultimate in industrial embedded
motherboard technology. No other system board available today
provides such impressive list of features:
CPU Support
•
Supports full series of Intel Celeron and PIII PGA370
processors (up to 100MHz FSB).
Supported Bus Clocks
•
66 and 100MHz.
Memory
•
Three DIMM sockets up to 384MB or 768MB(registered)
SDRAM, PC100 recommended (required for PIII or 100MHz).
On-Board I/O
•
2 Floppies up to 2.88 MB.
•
Dual channel PCI 32-bit EIDE controller.
•
Two high speed RS-232 serial ports 16 Bytes FIFO (16550).
•
One Centronics™ compatible bidirectional parallel port.
EPP/ECP mode compatible.