Intel Motherboard Raptor AT, Installation Manual

Page: 7 / 80

Introduction
V
Introduction
Thank you for your purchase of the Raptor AT industrial embedded
motherboard. The Raptor AT design was based on the Intel 440BX
chipset providing the ideal platform to industrial applications. The
Raptor AT design is based on the Intel Celeron and PIII processor.
With proper installation and maintenance, your Raptor AT will provide
years of high performance and trouble free operation.
This manual provides a detailed explanation into the installation and
use of the Raptor AT industrial embedded motherboard. This manual
is written for the novice PC user
/ installer. However, as with any major
computer component installation, previous experience is helpful and
should you not have prior experience, it would be prudent to have
someone assist you in the installation. This manual is broken down into
3 chapters and 5 appendixes.
Chapter 1 - System Board Pre-Configuration
This chapter provides all the necessary information for
installing the Raptor AT. Topics discussed include: installing
the CPU (if necessary), DRAM installation, jumper settings
for CPU and standard I/O. Connecting all the cables from the
system board to the chassis and peripherals.
Chapter 2 - BIOS Configuration
This chapter shows the final step in getting your system
firmware setup.
Chapter 3 - Upgrading
The Raptor AT provides a number of expansion options
including memory. All aspects of the upgrade possibilities are
covered.