Intel MFS5000SI - Multi-Flex Server Compute Module User Manual Download Page 14

Page: 14 / 112

Intel® Compute Module MFS5000SI User Guide

The following table summarizes the major features of the server board.

Table 1. Compute Module Features

Feature

Description

Processors

Support for up to two Dual-Core Intel

Xeon

processors 5000 sequence

Memory

Support for up to 32 GB of fully-buffered DDR2 667-MHz DIMMs (FB-DIMM)

Eight DIMM slots

Support for DIMM sparing and memory mirroring

Chipset

Intel® 5000P chipset, consisting of:

•

Intel® 5000P Memory Controller Hub (MCH)

•

Intel® 6321ESB I/O Controller Hub

Peripheral Interfaces

External connections:

•

Two USB 2.0 ports

•

Video connector

Internal connections:

•

One connector to the chassis I/O mezzanine card

Video

ATI* ES1000 controller with 16MB onboard memory

Hard Drive

LSI* 1064e SAS controller

LAN

Intel

8256EB dual port controller

Trusted Computing

Trusted Platform Module, version 1.2

Summary of Contents for MFS5000SI - Multi-Flex Server Compute Module

















































































































Search results

Summary of Contents for MFS5000SI - Multi-Flex Server Compute Module

Reviews:

Related manuals for MFS5000SI - Multi-Flex Server Compute Module

Brands by name

Popular brands

Intel MFS5000SI - Multi-Flex Server Compute Module, User Manual

Search results

Summary of Contents for MFS5000SI - Multi-Flex Server Compute Module

Reviews:

Related manuals for MFS5000SI - Multi-Flex Server Compute Module

Brands by name

Popular brands