Intel M50FCP1UR, Manual

Page: 67 / 133

Intel® Server System M50FCP1UR System Integration and Service Guide
67
Figure 82. Installing Processor Carrier Clip onto Processor–Part 2
3. Gently press down on two opposite sides of the carrier clip until it clicks into place. Repeat with the
other two sides (See Figure 82 ).
Figure 83. Removing Heat Sink from its Packaging
4. Locate the processor heat sink. To avoid damage to the heat sink, grasp it by its narrower top and
bottom edges as shown in Figure 83 .
Figure 84. Setting the Processor Heat Sink Anti-tilt Wires to the Outward Position
5. Set the anti-tilt wires to the outward position.
6. Turn the heat sink over and place it bottom side up on a flat surface.
7. Clean any residual old Thermal Interface Material (TIM) from the heat sink and apply new TIM.